Sigrity X
Sigrity X
Complete electrical analysis platform built to help you solve all your SI, PI, and EMC design challenges across the board.
Solve The Next Generation of Design Challenges with Sigrity X
If you hope to stay ahead of the competition, you must determine optimal design configurations, validate performance, and signoff on your critical interconnects well before you get to prototype. Sigrity X provides the only complete analysis solution designed to solve today’s multi-physics, multi-domain design challenges.
Signoff with Confidence
Sigrity allows you to move to production with confidence by providing a complete sign-off level design, analysis, and compliance environment for your critical serial link and parallel bus interfaces.
- Wizard-driven workflows for easy setup & analysis
- 10x performance with hardware correlated accuracy
- Built-in Pass/Fail compliance checking
- Automated performance analysis & reporting
DDR
HDMI
PCIe
USB
OpenPower
MIPI
SFP+
10GBASE
100BASE
Simulate Anything, Anywhere, Anytime With Sigrity X
Sigrity X Signal Integrity
Sigrity X Signal Integrity
- Key Sigrity SI Capabilities
- Serial Link Analysis (PCIe, USB, etc.)
- Power-Aware Parallel Bus Analysis (DDR)
- Interface Sign Off with Pass/Fail Compliance Analysis
- Pre-Layout and Post-Layout Analysis
- Automated Reporting
- Wizard-based Workflows
- Key Sigrity SI Capabilities
- Serial Link Analysis (PCIe, USB, etc.)
- Power-Aware Parallel Bus Analysis (DDR)
- Interface Sign Off with Pass/Fail Compliance Analysis
- Pre-Layout and Post-Layout Analysis
- Automated Reporting
- Wizard-based Workflows
Comprehensive Signal Integrity Analysis
Achieve comprehensive electrical analysis of PCB and full IC packages with accurate, power-aware pre-layout and post-layout simulation to improve signal quality and performance.
Available Workflows
Sigrity X Power Integrity
Sigrity X Power Integrity
- Key Sigrity PI Capabilities
- Power Delivery Network (PDN) Analysis and Optimization
- Decoupling Capacitor Optimization
- Pre-Layout and Post-Layout Analysis
- Automated Reporting
- Wizard-based Workflows
- Key Sigrity PI Capabilities
- Power Delivery Network (PDN) Analysis and Optimization
- Decoupling Capacitor Optimization
- Pre-Layout and Post-Layout Analysis
- Automated Reporting
- Wizard-based Workflows
Comprehensive Power Integrity Analysis
Analyze and optimize you Power Delivery Network (PDN) using AC frequency analysis as well as pre-layout and post-layout simulations to adhere to PDN requirements at the lowest possible cost.
Available Workflows
Sigrity X EM
Sigrity X EM
- Key Sigrity EM Capabilities
- Multi-solver (2D, 2.5D, 3D, MoM, Q3D, FDTD)
- S-parameter Characterization & Analysis
- Adaptive mesh refinement for IC package and PCB designs
- Accurate EM solutions for ECAD/MCAD 3D structures
- Low Memory Footprint, Near Linear Scalability
- Parallelization & Cloud-scaling ready
- Key Sigrity EM Capabilities
- Multi-solver (2D, 2.5D, 3D, MoM, Q3D, FDTD)
- S-parameter Characterization & Analysis
- Adaptive mesh refinement for IC package and PCB designs
- Accurate EM solutions for ECAD/MCAD 3D structures
- Low Memory Footprint, Near Linear Scalability
- Parallelization & Cloud-scaling ready
Electromagnetic Analysis Built for Accuracy, Performance, and Capacity
Sigrity X EM analysis solutions are built for accuracy and speed enabling you to simulate your increasingly complex structures without compromise. With a 10x performance increase over the competition you can be assured you will be able to simulate with the fidelity you need and the speed you want. Multiple solver engines enable designers to leverage the best solver for the task (or deploy a combination) all from a cohesive and intuitive user interface.
Available Workflows
Sigrity X EMI/EMC
Sigrity X EMI/EMC
- Key Sigrity EMI/EMC Capabilities
- Evaluate near-field E/H densities and radiation effects
- Identify problematic EMI radiating devices
- Determine necessary shielding and faraday cage placement
- Determine the impact of external radiation and system susceptibility
- Key Sigrity EMI/EMC Capabilities
- Evaluate near-field E/H densities and radiation effects
- Identify problematic EMI radiating devices
- Determine necessary shielding and faraday cage placement
- Determine the impact of external radiation and system susceptibility
Comprehensive EMI/EMC Analysis
Analyze near-field E/H densities and radiation effects as well as the impact of external radiation to easily identify problematic EMI radiating devices, determine necessary shielding and faraday cage placement, and evaluate overall system susceptibility.
Available Workflows
Sigrity X Thermal
Sigrity X Thermal
- Key Sigrity Thermal Capabilities
- Full System Electrothermal Co-Simulation
- DC Static and Transient Analysis
- Incorporation of External Heat Sources and Thermal Transfer Coefficients
- FEM Solver for Accurate Conductive Joule Heating Analysis
- Powerful Computational Engine and Meshing Technology
- Key Sigrity Thermal Capabilities
- Full System Electrothermal Co-Simulation
- DC Static and Transient Analysis
- Incorporation of External Heat Sources and Thermal Transfer Coefficients
- FEM Solver for Accurate Conductive Joule Heating Analysis
- Powerful Computational Engine and Meshing Technology
Comprehensive Thermal Analysis
Heat is one of the biggest factors in the performance, reliability, and safety of your PCB designs. Thermal effects can be simulated and heat mitigation efforts can be incorporated within your electronics early using Sigrity X. Efficiently identify hotspots and optimize your thermal profile as you design to ensure products will stay cool and function as intended.
Available Workflows
Sigrity X ESD
Sigrity X ESD
- Key Sigrity ESD Capabilities
- Realistic Representation of IEC-61000-4-2 Testbench Environment
- Emulate ESD Pulse Injections
- Analyze the Effects of a Physical ESD Gun on Your Design
- Key Sigrity ESD Capabilities
- Realistic Representation of IEC-61000-4-2 Testbench Environment
- Emulate ESD Pulse Injections
- Analyze the Effects of a Physical ESD Gun on Your Design
Comprehensive ESD Analysis
Emulate and analyze the effects of a physical ESD gun on the design to prevent product damage, ensure adherence to regulatory standards and improve reliability.
Available Workflows
Try Sigrity X Today
The Sigrity Difference
Unified Design Environment
The unique, workflow-driven design environment and comprehensive simulation engines allow you to quickly access and perform the analysis needed to meet your design goals. As your analysis requirements increase, easily add additional workflows all within the same common UI. Never miss a step or feel unsure of your simulation setup with Sigrity workflow driven analysis.
Workflows
Step-by-step analysis processes
Step-by-step analysis processes
The unique, workflow-driven design environment and comprehensive simulation engines allow you to quickly access and perform the analysis needed to meet your design goals. As your analysis requirements increase, easily add additional workflows all within the same common UI. Never miss a step or feel unsure of your simulation setup with Sigrity workflow driven analysis.
Multi-CAD
CAD neutral by design
CAD neutral by design
Perform comprehensive analysis of your PCBs regardless of the file format or CAD tool used for the design. Sigrity X accepts neutral file formats, such as IPC-2581 and ODB++, as well as CAD-specific files such as Altium, Cadence, Mentor, and Zuken.
PCB & IC PKG Aware
Automate simulation prep and setup
Drastically reduce simulation setup time and errors with PCB & IC PKG aware setup with Sigrity X. Sigrity X understands PCB & Package structures and natively integrates with the Cadence PCB file formats to automate port configurations and make flex and rigid-flex simulation setup easy and straightforward.
Automated Reporting
Easily capture and share simulation results
Easily capture and share simulation results
Automatically generate reports containing tabular data, plots, pass/fail results, and more to efficiently communicate the analysis and required changes for your PCB designs.
Shift Left With Sigrity X
Simulation shouldn’t be a singular event for the end of the design. To maximize the benefit and effectiveness of simulation in your design flow it is important to be able to simulate effectively at any stage. Sigrity X provides access to the most comprehensive range of simulation engines simulation engines and tools to allow for full multi-physics analysis to occur at all phases enabling a true simulation driven digital twin-based design flow.
Sigrity Tokens
Flexible and cost effective access
Flexible and cost effective access
Gain access to the full Sigrity X platform on-demand with Sigrity tokens. Sigrity tokens solves one of the most prevalent problems for teams looking to adopt a simulation-driven workflow, usage and solver access. Traditional models require purchase of each solver and analysis tool separately with many of the tools sitting idle while those particular simulation engines are not needed. This makes justifying the cost of simulation tools a big challenge and leaves you susceptible to other SI/PI issues that cannot be analyzed. Sigrity tokens allows teams to leverage the full Sigrity X portfolio on-demand saving significant costs and enabling simulation to be broadly used throughout the design process, ensuring high utilization and efficiency.
In-Design Analysis
Simulate and fix direclty inside your PCB design environment
Simulate and fix direclty inside your PCB design environment
Analyze common SI and PI problems without leaving your PCB design environment. Graphical overlays as well as tabular results help you easily identify and correct issues directly in the PCB canvas as you design.
Topology Workbench
Powerful pre and post layout analysis & optimization
Powerful pre and post layout analysis & optimization
TopXP provides a ready-made interface for pre and post layout exploration and analysis. From single board to multi-board system level simulation, TopXP provides the flexible easy-to-use environment needed to perform your SI/PI analysis.
Layout Workbench
Full board multi-physics analysis
Full board multi-physics analysis
Interact with the physical design and run full board simulation and extraction to build models and test your design effectiveness. Perform multi-corner optimization, such as decap placement, with ease.
3D Workbench
Full Wave 3D electrical and mechanical simulation
Full Wave 3D electrical and mechanical simulation
Easily and model your complex 3D structures from via, to connectors, and full flex PCBs. With automated setup and unmatched performance, you can ensure hardware correlated accuracy for your critical 3D structures.
Build True Virtual Prototypes
Often the size and granularity of simulations required to obtain a real-world analysis results in lengthy run times that are not feasible in today’s fast-paced markets. Sigrity X allows you to build true virtual prototypes and perform analysis quickly with the industry leading performance, capacity, and accuracy.
Parallelized Architecture
10x your simulation performance
10x your simulation performance
Full multi-threading support allows you to accelerate analysis speed even farther by leveraging your multi-core compute resources to go from run to results in no-time.
Cloud Accelerated
Scale seamlessly and linearly
Scale seamlessly and linearly
Easily leverage the cloud to scale your compute resources with near linear improvement in performance. With the lowest memory footprint on the market, you can scale cost effectively levering less expensive compute resources while producing faster results.
Full 3D Signoff
High capacity high accuracy 3D EM
High capacity high accuracy 3D EM
Clarity 3D EM was architected from the ground up and provides the fastest, highest capacity, lowest memory footprint solution for EM extraction. Simulate with confidence knowing that you can handle the most complex solution spaces without approximation or cut and stitch, ensuring what you analyze represents what you will build.
Hardware Correlated
Simulate what you build
Simulate what you build
Analyze and verify with confidence knowing your results will have tight correlation to real-world hardware. Cadence rigorously tests Sigrity X against their own hardware ensuring the correlation you need to sign-off with confidence.
Optimize with AI
AI-Assisted design exploration
AI-Assisted design exploration
AI-powered optimization architecture enables efficient evaluation of design corners and design alternatives to perform hardware-accurate system-level optimization in a fraction of the time based on defined design goals.
Training Included
Access free training materials from EMA and Cadence to get you simulating with maximum efficiency right from the start.
- Learn at Your Pace
- Over 25 Courses & Workshops
- Earn Badges & Certificates
- Courses for All Levels of Experience
Finally, A Simulation Solution for Everyone
From single users to large teams Sigrity X enables you to leverage simulation at all phases.
Sigrity X for Electrical Engineers
Get access to the easy-to-use comprehensive simulation environment which allows you to run analysis quickly and accurately across SI, PI, Thermal and more.
Key Reasons Electrical Engineers Choose Sigrity X
- Easy to use workflow driven UI/UX
- Pre-layout analysis
- Develop power delivery and SI guidelines upfront
- Direct integration with PCB implementation
- Automated report generation
- Pre and post layout what-if analysis
Sigrity X for Simulation Experts
Sigrity provides the fastest, highest capacity simulation environment available. Expert level users need expert level tools that can support the complex design challenges you are faced with. Sigrity represents the most advanced electronics multi-physics simulation platform available on the market.
Key Reasons Simulation Experts Choose Sigrity X
- Up to 10x faster run-times than other leading simulation engines
- Accurate, hardware-correlated results
- Automated reporting
- Unified Design Environment for all your SI/PI/EMC needs
- Multi-Physics, Multi-Domain Analysis
Sigrity X for PCB Designers
Sigrity X provides integrated in-design analysis allowing you to run simulations as you design. Save time, prevent errors, and leverage simulation to improve your design efficiency with the first simulation environment built to work inside the existing PCB design flow.
Key Reasons PCB Designers Choose Sigrity X
- SI and PI Analysis within the PCB Canvas
- Unified environment for analysis and PCB design
- Minimal setup and models required
- Direct integration with PCB implementation
- Post-Layout Analysis
- Graphical overlay and tabular results
Sigrity X for Managers
Future proof your design team with access to the leading multi-physics analysis platform on the market. Enable your team with the tools they need to identify and solve any electrical analysis issue upfront through simulation. The unique Sigrity X token-based licensing model provides easy access to all the simulation tools and allows you to effectively bring simulation to all users without heavy licenses and access costs. Bring your design predictability, performance, and accuracy to new heights with Sigrity X.
Key Reasons Managers Choose Sigrity X
- Quick repeatable path to analysis that can be leveraged throughout your organization
- Uniform Design Environment minimizes learning curves
- Prevent over-designing with cost vs. performance trade off assessments
- Automated compliance reporting ensures signoff accuracy
- Ensure maximum utilization with unique Sigrity X token license model
Your Trusted Design Partner
- Support
- Software
- Services
- Training
Over 30 years’ experience helping engineers design, validate, and build hardware successfully.
Resources
Learn how to leverage all the functionality Sigrity X has to offer.
Type
IR Drop Analysis Workshop
Learn how to evaluate the voltage drop across the PCB and guarantee adequate power delivery with the IR Drop Analysis Workshop.
Electrical Rule Checking Workshop
Learn how to analyze impedance, coupling, and references in your design to improve signal integrity with the Electrical Rule Checking Workshop and Sigrity.
